Intervalve Cast Steel Gate Valve
Intervalve Cast Steel Gate Valve Gate Valve Valves Selangor, Malaysia, Kuala Lumpur (KL), Johor Bahru (JB), Indonesia, Puchong Supplier, Suppliers, Supply, Supplies | Sakti Suria (M) Sdn Bhd
 

Design
Pr. & Temp Rating
Face to Face & End to End Dimensions
Flange Ends
Butt Weld Ends
Testing

:
:
:
:
:
:

ASME B16.34 / API 600 / IBR
ANSI B16.34
ASME B16.10 (upto 36'')
ASME B16.5 (upto 24'') / ASME 16.47 (above 24'')
ASME B16.25
API 598 / EN 12266 PART 1 (BS 6755 PART 1)


API TRIM NO. & SEAT HARDFACING

API 600
Trim No.
Nominal Trim Material Type Stem Body Seating Surface Wedge Seating Surface Back Seat
1 F6 13% Cr Steel 13% Cr 13% Cr
4 Hard F6 Hardfaced with 13% Cr Steel 13% Cr Hardfaced with 13% Cr
5 Hardfaced Hardfaced with Co-Cr-W Alloy 13% Cr Hardfaced with Stellite 6
8 F6 & Hardfaced 13% Cr Steel & Hardfaced with Co-Cr-W Alloy 13% Cr Stellite 6 13% Cr Stellite 6 / 13 % Cr


Recommended Body/Bonnet & Trim Material For High Temperature Services (Water/Steam)

Temperature Body / Bonnet Materials API Trim No.
Up to 800 0F (427 0C) A 216 Gr. WCB, A 217 Gr. WC6, A 217 Gr. WC9 1, 4, 5, 8
Above 800 0F (427 0C)
& Up to 1000 
0F (540 0C)
A 217 Gr.WC6,
A 217 Gr.WC9
5 & 8
Above 1000 0F (540 0C) A 217 Gr.WC6, A 217 Gr.WC9 5

Note: For the selection of suitable MOC for other media, consult factory.

 
 
 
Sr. # Part Name
1 Body
2 Wedge
3 Seat
4 Stem
5 Bonnet
6 Hardwares
7 Back Seat
8 Packing
9 Gland
10 Gland Flange
11 Yoke Sleeve / Stem Nut
12 Yoke Sleeve Retainer
13 Hand Wheel
14 Hand Wheel Nut
*15 Seal Ring
*16 Retaining Ring
*17 Bearing

  • The product designs are in accordance to ANSI B16.34 / API 600 / IBR with reliable sealing & sturdy construction to ensure excellent performance.

  •  Outside screw & yoke (OS & Y) construction.

  • Back Seat arrangement to provide isolation of stuffing box for On-Line serviceability.

  • All trim material available as per API 600.

  • Pressure sealed bonnet for ASME #900 and above to provide excellent sealing against increased line pressure.

  • Fully guided wedge to ensure proper alignment while seating.

  • Full range of Body / Bonnet & Trim material.
     
  • Valve Bypass / Deep stuffing box arrangement optionally available.
     
  • Valves are available in Flange End & Butt Weld end connections (other connections can be provided on request).
     
  • Gear / Electrical operator can be provided if required.
     
  • Locking arrangement can be provided with hand wheel / gear operator, if required.
     
  • Position indicator / limit switches for ON-OFF indication provided on request.
  •  

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version